• Universal for many pipes and tubes
• Compact, with integral absorption of torque during bending
• Super light, drive unit only 8,5 kg (18.7 lbs)
• Can be used anywhere with-out previous setting
• Fast and creep speed operation for precise bending, e.g. 90° bends, Ø 7⁄8" in only 6 s
• Angle scale 0 to 180°
• Rapid change of bending and back formers
• Only one type of bending and back formers for REMS Curvo, REMS Curvo 50 and REMS Akku-Curvo
• Maintenance-free gear with safety slipping clutch
• 500W battery motor
• Bender recovered after a small number of bends through savings on fittings
• Approx. 90 pipe bends of 7⁄8" with one battery charge
• Overheating protection and battery status check
• Cordless tube bender Ø 10 – 40 mm, Ø 1⁄4 – 11⁄8", up to 180°
• Hard, semi-hard, soft copper pipes, also thin-walled, Ø 10 – 28 mm, Ø 3⁄8 – 11⁄8", soft coated copper pipes, also thin-walled, Ø 10 – 18 mm, thick-walled copper pipes K65 for refrigeration and air conditioning technology EN 12735-1 Ø 3⁄8 – 11⁄8", pipes of the press fitting systems of stainless steel Ø 12 – 28 mm, carbon steel, also coated, Ø 12–28 mm, soft precision steel pipes Ø 10–28mm, steel pipes EN 10255 Ø 1⁄4–3⁄4", electrical installation pipes EN 50086 Ø 16 – 25 mm, composite tubes Ø 14 – 40 mm, etc
• Drive unit with maintenance-free gear and safety slipping clutch, powerful 21.6 V battery motor, stepless electronic safety switch, right and left-hand rotation, insert bolt
• Machine status check with overload protection, temperature monitoring, battery charging status check. Li-Ion 21.6 V, 5.0 Ah, Li-Ion 110 V, 50 – 60 Hz, 90 W rapid charger
• Bending formers and back formers included
• Set: 3⁄8 - 1⁄2" - 5⁄8" - 3⁄4" - 7⁄8" O.D
• 1" OD copper former set is sold separately, PN (581260)
• In sturdy steel case

Documentation:

• REMS Akku-Curvo 22 V Manual (PDF - 6 MB)
• REMS Akku Curvo 22 V Global Brochure (PDF - 2 MB)