 |
REMS - Akku-Curvo 22v Cordless Pipe Bender - No Formers Included - (580014).
- Universal for many pipes and tubes
- Compact, with integral absorption of torque during bending
- Super light, drive unit only 8,5 kg (18.7 lbs)
- Can be used anywhere with-out previous setting
- Fast and creep speed operation for precise bending, e.g. 90° bends, Ø 7⁄8" in only 6 s
- Angle scale 0 to 180°
- Rapid change of bending and back formers
- Only one type of bending and back formers for REMS Curvo, REMS Curvo 50 and REMS Akku-Curvo
- Maintenance-free gear with safety slipping clutch
- 500W battery motor
- Bender recovered after a small number of bends through savings on fittings
- Approx. 90 pipe bends of 7⁄8" with one battery charge
- Overheating protection and battery status check
- Cordless tube bender Ø 10 – 40 mm, Ø 1⁄4 – 1-1⁄8", up to 180°
- Hard, semi-hard, soft copper pipes, also thin-walled, Ø 10 – 28 mm, Ø 3⁄8 – 11⁄8", soft coated copper pipes, also thin-walled, Ø 10 – 18 mm, thick-walled copper pipes K65 for refrigeration and air conditioning technology EN 12735-1 Ø 3⁄8 – 11⁄8", pipes of the press fitting systems of stainless steel Ø 12 – 28 mm, carbon steel, also coated, Ø 12–28 mm, soft precision steel pipes Ø 10–28mm, steel pipes EN 10255 Ø 1⁄4–3⁄4", electrical installation pipes EN 50086 Ø 16 – 25 mm, composite tubes Ø 14 – 40 mm, etc
- Drive unit with maintenance-free gear and safety slipping clutch, powerful 21.6 V battery motor, stepless electronic safety switch, right and left-hand rotation, insert bolt
- Machine status check with overload protection, temperature monitoring, battery charging status check. Li-Ion 21.6 V, 5.0 Ah, Li-Ion 110 V, 50 – 60 Hz, 90 W rapid charger
- Bending formers and back formers sold separately
- In sturdy steel case
Documentation:
REMS Pipe and Tubing Benders
|
|
|