 |
Trumpf - TruTool PN 200 Li-ion Rechargeable Battery 18 volt Profile Nibbler with extension is well-suited for deep trapezoid sheets up to 3.4" in depth. This tool cuts flat and corrugated sheets of up to 14 gauge (2 mm). There is no need for tools to change the cutting direction. Rotating punch allows change of cutting direction on the spot. Compact and light-weight design is perfect for interior cutouts and notches. Punch and die are easily replaceable, without the need for additional tools.
One full 4 Ah rechargeable battery, lasts approximately 40 meters (130 feet) in 1 mm mild steel sheet. In 2mm mild steel sheet, full battery lasts approximately 16 meters (50 feet). Nibbler cuts best when used in conjunction with medium weight clear oil, lithium spray or wax lubricant. Users almost double the life of punch and die, compared to dry cutting. Nibbler works without feed force, distortion, emissions, or sparks. All
of which is beneficial for roofing, coil cutting, container and drum
construction.
Modern brushless motor features Power-Head-Technology. It is specifically designed for low-voltage rechargeable batteries, with electronic overload protection. Up to 20% longer run-time per charge, than previous generation of motors.
This compact and light-weight nibbler has a soft grip to dampen vibration, and reduce hand fatigue. 18 volt Li-ion rechargeable batteries are compatible with all current TRUMPF 18 volt cordless tools. You can use the speed controller to adjust working speed for individual cutting task. It is extremely efficient if you have predefined cutting lines or a template. N 200 is also well-suited for cutouts, with 4 mm minimum radius.
The rechargeable battery and electric variants of the TruTool N 200, PN 200, and PN 201 are built on the same multi-functional machine basis. Each tool has its own particular strengths for processing different sheet metal: TruTool N 200 for flat and corrugated sheet; TruTool PN 200 for trapezoidal sheets up to 3.34 in. deep and C, L, and U profiles; and TruTool PN 201 for trapezoidal sheets up to 6.37 in. in depth.
5-year manufacturer warranty. Tool ships complete in case, with two 18 volt 4 Ah rechargeable batteries, charger, belt clip, allen key, PN 200 nibbler head.
Trumpf TruTool N 200 Manual
|
TruTool PN 200 18V LiHD rechargeable battery
|
|---|
|
Maximum sheet thicknesses
|
| |
Maximum sheet thickness, steel 400 N/mm²
|
2 mm
| |
Maximum sheet thickness, steel 600 N/mm²
|
1.5 mm
| |
Maximum sheet thickness, steel 800 N/mm²
|
1 mm
| |
Maximum sheet thickness, aluminum up to 250 N/mm²
|
2.5 mm
| |
Radii
|
| |
Smallest radius
|
4 mm
| |
General
|
| |
Working speed
|
1.6 m/min
| |
Stroke rate at nominal load
|
1380 1/min
| |
Starting hole diameter
|
17 mm
| |
Voltage
|
18 V
| |
Weight
|
| |
Weight (with 4 Ah rechargeable battery)
|
2.2 kg
|
|
|
|